How to distinguish the true and false of the extra soft silicone wire

Release time:

2023-05-05

Silicone wire is favored by manufacturers because of its high temperature resistance and aging resistance. It is often used in the production of various electrical appliances, mechanical instruments, lighting fixtures and other products. How to distinguish the true and false of the extra soft silicone wire?

extra soft silicone wire

We can judge most of the fake 5/more than 5 lines by looking at them. The characters printed on the real five-line line plastic cover are very clear and smooth, with almost no jaggedness. The printing quality of fake characters is poor, some fonts are unclear, and some fonts are seriously jagged. 5 types of authentic products are marked with cat5 letters, more than 5 types are marked with 5e letters, and fake products are usually marked with CAT5 and 5E letters.

1. Feel with your hands. If you still can't tell by looking, you can feel the difference in the material of the real 5/super 5 threads by touching. The real 5 types/super 5 types of wires are soft, mainly to meet the needs of different network environments. Silicon cables generally use copper wires as the conductor core, which is soft (because some network environments require small-angle bending of the network cable, so if the wire is hard, it is easy to break the circuit. The plot described in the plot is to analyze the volume in the conceptual design; in order to reduce the production cost, some illegal manufacturers add other metal elements to the copper, and the wires produced are relatively hard, not easy to bend, and easy to break during use.

2. Cut with a knife. In this step, you only need to use scissors to remove the plastic sheath outside the small stub to expose 4 pairs of core wires. Here, we further judge by looking at the real 5 kinds of over 5 kinds of wires and 4 pairs of core wires. The white color is not pure white, but the color of the paired core wires. Crystal head hour division line. The fakes of silicone wire are usually pure white or the color is not obvious. The other is the winding density of 4 pairs of core wires. The real 5/super 5 winding density is moderate, and the direction is counterclockwise. False lines are usually less dense, and the direction may also be clockwise (less). This is mainly due to the simplicity of making and the low production cost.

3. Burn the silicone heating wire with fire, and test the silicone heating wire in a high temperature environment from 35°C to 40°C to see whether the outer tape will be soft, whether the real silicone wire will be soft, not necessarily fake, the real network Silicone is flame retardant, but fake ones are not flame retardant and do not meet the testing standards.

The above is the introduction of "how to distinguish the genuine and fake extra soft silicone wire". If you have the demand for extra soft silicone wire, please contact ZHONGZHEN, which is a professional silicone wire manufacturer.

Key words:

Pre

The wire beam sub-material number must be compared with the positioning plate to

In a sense, it is also an insulated wire. So

Pre

The wire beam sub-material number must be compared with the positioning plate to

In a sense, it is also an insulated wire. So

News