The composition and application method of extra soft silicone wire

Release time:

2023-05-05

Extra-soft silicone wire is a kind of silicone wire. The extra-soft silicone wire has super high and low temperature resistance, high temperature resistance of 200 degrees, and low temperature resistance of minus -60 degrees. The outer skin is made of super soft and environmentally friendly silicone wire, which has no peculiar smell, is soft and can be bent at will, is not easy to harden, and is resistant to acid and alkali and has a long service life. The conductor is made of high-quality ultra-fine 0.08mm tinned copper, which has super strong anti-oxidation ability. I believe that many people do not understand the composition and application method of Tete soft silicone wire, which is still necessary to understand. Now let's introduce the composition and application method of the extra soft silicone wire.

soft silicone wire

1. Composition of extra soft silicone wire

conductor. The conductor is the conductive part of the extra-soft silicone wire, which is used for power transmission and is the main part of the extra-soft silicone wire.

Insulation. The insulating layer is to isolate the conductor from the earth and the conductors of different phases electrically to ensure the transmission of electric energy. It is an indispensable part of the structure of the extra soft silicone wire.

Shield. Extra-soft silicone wires above about 15KV usually include a conductor shield and an insulation shield.

The protective layer. The function of the protective layer is to protect the extra-soft silicone wire from external impurities and moisture, and prevent the wire from being directly damaged by external force.

2. How to use extra soft silicone wire

During the storage process, you should be diligent in inspection. If you find that the asphalt of the cable with the hemp protective layer or the steel belt without the hemp protective layer has melted and the steel belt has rusted, you should immediately take measures to smear it with asphalt.

During the storage period, tumbling should be carried out regularly. When rolling, roll the edge of the plate downward to prevent the bottom surface from being damp and rotted, and to make the insulating liquid in the cable evenly distributed.

When the lead-clad cables are cut and shipped in pieces, the ends should be properly wrapped and welded with lead skins to prevent oil leakage, moisture and dust from entering. Do not use acidic flux during sealing and welding, and must use insulating tape or adhesive tape to seal.

The above is the "composition and application method of extra soft silicone wire". When choosing extra soft silicone wire, the heat generated by the loss of each part of the electronic wire should be considered, and the temperature of the electronic cable will not exceed its allowable temperature. temperature. In most cases, the transmission capacity of an electronic cable is determined by its allowable temperature.

Key words:

Pre

Maximizing Efficiency: The Power of Energy Storage Harness

The wire beam sub-material number must be compared with the positioning plate to

Pre

Maximizing Efficiency: The Power of Energy Storage Harness

The wire beam sub-material number must be compared with the positioning plate to

News